Product List

(Total 22 Products )
The Co2 laser marking machine series is applicable to almost any non-metal material surface. It has many clear advantages with comparison to traditional marking methods, such as ...
Min. Order: 1 Set
Technical Characteristics

Open circuit voltage (Voc): 44.28V
Optimum operating voltage: (Vmp)35.5V
Short circuit current(Isc): 6.02A
Optimum operating current (Imp): ...
The fastest laser grooving machine in China, is specially designed to manufacture LGBC (laser grooved buried contact) silicon solar cell. It can be implemented with the LFC (Laser ...
Min. Order: 1 Set
INTRODUCTION:
The 400W laser welding/cutting machine is used to weld/cut/drill metal sheets, such as steel, copper, iron, etc. It adopts double lamps assembled and double power ...
The laser scribing machine YMS-50 is capable of scribing various silicon wafer, solar cell, ceramic wafer, thin metal sheet (~0.5 mm thick maximum), etc., in industries of ...
Min. Order: 1 Set
This machine is applied for edge isolation of crystalline silicon solar cell. Compared to traditional chemical corrosion method, the laser edge isolation method is cleaner and more ...
Technical Characteristics

Open circuit voltage(Voc): 44.28V
Optimum operating voltage: (Vmp)35.5V
Short circuit current (Isc): 5.42A
Optimum operating current (Imp): ...
The laser welding machine YMW-80 is designed for jewelry welding, hole filling, eyelet removing, crack filling, parts joining, etc. The system offers obvious advantages of smaller ...
Min. Order: 1 Set
The new generation of laser marking machine YMM-50 is applicable to almost any material surface. We have 8 years of experience on laser system, which makes the system much more ...
Min. Order: 1 Set
The laser welding machine series is capable of precise welding of almost any kind of metal and their alloys. Its advantages over the conventional welding techniques include fine ...
Min. Order: 1 Set
Characteristics

Open circuit voltage (Voc): 21.3V
Optimum operating voltage (Vmp): 17.4 V
Short circuit current (Isc): 5.2A
Optimum operating current (Imp): 4.6A
Peak ...
On the basis of mature YMS-50 laser cutting machine, YMS-50D solar cell laser cutting machine adopts more reliable semiconductor pump source in stead of the original krypton lamp ...
Min. Order: 1 Piece
Technical Characteristics

Open circuit voltage (Voc): 21.5V
Optimum operating voltage (Vmp): 16.9V
Short circuit current (Isc): 1.35A
Optimum operating current (Imp): ...
The 400W laser cutting machine is used to cut and drill metal sheets, such as steel, copper, iron, etc. It adopts double lamps assembled and double power supply with high laser ...
High speed and accurate 532nm solid-state diamond laser sawing system, offers the advantage of contactless sawing. It takes away a thin layer of diamond at each passage regardless ...
Min. Order: 1 Set
The laser scribing machine is specially designed for isolation of a-Si (amorphous silicon) and back contacts such as aluminum coating of the a-Si thin-film solar cell, without any ...
Min. Order: 1 set
This laser cutting machine is specially designed for cutting solar cell. YUEMAO LASER is one of the best and professional laser system manufacturers in China. Yuemao Laser system ...
Min. Order: 1 set
Capable of scribing/drilling thickness: Up to 2.5mm.

SUITABLE LASER SYSTEM
Model: YMS-10 YMG-5 YMS-10F
Scribing speeds, mm/s: 40-80 30-60 60-150(cutting through)
Min kerf ...
Min. Order: 1 Set
Technical Characteristics

Open circuit voltage(Voc): 21.8V
Optimum operating voltage (Vmp): 17.9V
Short circuit current (Isc): 3.0A
Optimum operating current (Imp): 2.81A ...
YMC Laser cutting machine series is used to cut and drill the metal sheets, such as steel, copper, etc. It adopts double lamps assembled in UK-made ceramic cavity with higher laser ...
Min. Order: 1 Set
Technical Characteristics

Open circuit voltage (Voc): 45.01V
Optimum operating voltage: (Vmp)35.89V
Short circuit current (Isc): 5.23A
Optimum operating current (Imp): ...
Features:
1. Typical processing speed is up to 300 mm/s (traditional machine with speed of about 100 mm/s )
2. Min kerf width: 0.02 mm (traditional machine: 0.05 mm)
3. Pump ...

Last Login Date: Jun 15, 2012

Business Type: Manufacturer/Factory, Trading Company

Main Products: Yuemao Laser, Laser Machine, Laser Equipment, Laser Welding Machine, Laser Scribing Machine